Tecre Graphic Punches are the best, hands down, of all the graphic cutters out there.
Sure, there are plenty of others floating around, but after making millions of badges ourselves, we have done the research!
This model of graphic punch is the #100 model
, which is used to punch out graphics for 1 Inch badges
, the machine that accompanies this cutter is the model #100 Badge Machine
These graphic punches save you loads of time, and are the easiest to use out of the lot. Simply line your graphic up with the top hole, press the lever, and you are done! It is also entirely possible to cut more than one sheet at once, saving you even more time!
Trust us when we say these are the best on the market, as Australia's largest badge manufacturer, we would not use anything else. We love this product, and know you will be extremely happy with it too!How to cut a graphic using a Manual Graphic Punch 1. Insert graphic strip into graphic punch and center the graphic in the hole.
2. Push handle down until the punch goes all the way through the graphic.
3. Remove the cut graphic and place to the side.
4. Pull the graphic strip through, center the next graphic, and repeat steps 2 and 3.